Search
Searching...

Substitution Reactions

By James Ashenhurst

Polar Protic? Polar Aprotic? Nonpolar? All About Solvents

Last updated: December 6th, 2022 |

Polar Protic vs Polar Aprotic vs Nonpolar: About Solvents In Organic Chemistry

A lot of students I talk to have questions about solvents.

Solvents can cause considerable confusion in reactions, because they’re listed along with the reagents of a reaction but often don’t actually participate in the reaction itself. And to be honest, a lot of instructors (myself included) are less than consistent about when to include solvents and when not to. So the whole exercise can come across as somewhat arbitrary: when do you know when to include the solvent?

Table Of Contents

  1. What Is A Solvent?
  2. What Does “Polar” and “Non-Polar” Mean?
  3. The Distinction Between “Protic” And “Aprotic” Solvents
  4. Nonpolar Solvents: A Table
  5. “Borderline” Polar Aprotic Solvents
  6. Polar Aprotic Solvents: A Table
  7. Polar Protic Solvents: A Table
  8. Notes

1. What Is A Solvent?

Let’s back up. What’s a solvent, anyway?

A solvent is a liquid that serves as the medium for a reaction. It can serve two major purposes:

  1. (Non-participatory) to dissolve the reactants. Remember “like dissolves like” ? Polar solvents are best for dissolving polar reactants (such as ions); nonpolar solvents are best for dissolving nonpolar reactants (such as hydrocarbons).
  2. Participatory:  as a source of acid (proton), base (removing protons), or as a nucleophile (donating a lone pair of electrons). The only class of solvents for which this is something you generally need to worry about are polar protic solvents (see below).

2.  Polar Solvents Have Large Dipole Moments. Non-Polar Solvents Have Small Or Zero Dipole Moment

OK. So what does “polar” and “non-polar” mean?

  • Polar solvents have large dipole moments (aka “partial charges”); they contain bonds between atoms with very different electronegativities, such as oxygen and hydrogen.
  • Non polar solvents contain bonds between atoms with similar electronegativities, such as carbon and hydrogen (think hydrocarbons, such as gasoline).  Bonds between atoms with similar electronegativities will lack partial charges; it’s this absence of charge which makes these molecules “non-polar”.

There are two direct ways of measuring polarity. One is through measuring a constant called “dielectric constant” or permitivity. The greater the dielectric constant, the greater the polarity (water = high, gasoline = low).  A second comes from directly measuring the dipole moment.

Polarity is a continuum. While we can all agree that pentane is “non-polar”, and water is “polar”, there are borderline cases like diethyl ether, dichloromethane, and tetrahydrofuran (THF) which have both polar and non-polar characteristics. In a pinch, a good rule-of-thumb dividing line between “polar” and “non-polar” is miscibility with water. Diethyl ether and dichloromethane don’t mix with water; THF, DMSO, acetonitrile, DMF, acetone and short-chain alcohols do.

3. “Protic” Solvents Have O-H or N-H Bonds And Can Hydrogen-Bond With Themselves. “Aprotic” Solvents Cannot Be Hydrogen Bond Donors

There’s a final distinction to be made and this also causes confusion. Some solvents are called “protic” and some are called “aprotic”.  What makes a solvent a “protic” solvent, anyway?

  • Protic solvents have O-H or N-H bonds. Why is this important? Because protic solvents can participate in hydrogen bonding, which is a powerful intermolecular force. Additionally, these O-H or N-H bonds can serve as a source of protons (H+).
  • Aprotic solvents may have hydrogens on them somewhere, but they lack O-H or N-H bonds, and therefore cannot hydrogen bond with themselves.
For the average first semester student, these distinctions come up the most in substitution reactions, where hydrogen bonding solvents tend to decrease the reactivity of nucleophiles; polar aprotic solvents, on the other hand, do not.
There are 3 types of solvents commonly encountered: nonpolar, polar aprotic, and polar protic. (There ain’t such a thing as a non-polar protic solvent).

4. Nonpolar Solvents Have Little To No Dipole Moment

These solvents have low dielectric constants (<5) and are not good solvents for charged species such as anions. However diethyl ether (Et2O) is a common solvent for Grignard reactions; its lone pairs are Lewis basic and can help to solvate the Mg cation.

table of non polar solvents with dielectric constants and dipole moments for pentane benzene toluene chloroform diethyl ether

5. “Borderline” Polar Aprotic Solvents Have Small Dipole Moments And Low (<10) Dielectric Constants

These solvents have moderately higher dielectric constants than the nonpolar solvents (between 5 and 20). Since they have intermediate polarity they are good “general purpose” solvents for a wide range of reactions. They are “aprotic” because they lack O-H or N-H bonds. For our purposes they don’t participate in reactions: they serve only as the medium.

borderline polar aprotic solvents with dielectric constants and dipole moments dichloromethane thf ethyl acetate

6. Four Key Polar Aprotic Solvents With Large (>10) Dielectric Constants

These solvents all have large dielectric constants (>20) and large dipole moments, but they do not participate in hydrogen bonding (no O-H or N-H bonds). Their high polarity allows them to dissolve charged species such as various anions used as nucleophiles (e.g. CN(-), HO(-), etc.). The lack of hydrogen bonding in the solvent means that these nucleophiles are relatively “free” in solution, making them more reactive. For our purposes these solvents do not participate in reactions.

table of polar aprotic solvents including dielectrric constant and dipole moment acetone dmf dmso acetonitrile

7. Polar Protic Solvents: A Table

Polar protic solvents tend to have high dielectric constants and high dipole moments. Furthermore, since they possess O-H or N-H bonds, they can also participate in hydrogen bonding. These solvents can also serve as acids (sources of protons) and weak nucleophiles (forming bonds with strong electrophiles).

They are most commonly used as the solvent for their conjugate bases. (e.g. H2O is used as the solvent for HO(-); EtOH is used as the solvent for EtO(-). )

table of polar protic solvents ammonia and alcohols dielectric constants and dipole moments

These types of solvents are by far the most likely to participate in reactions. There are many examples (too many to list) where a polar protic solvent such as water, methanol, or ethanol can serve as the nucleophile in a reaction, often when a strong electrophile (such as an acid) is present. So if you see this type of solvent, be on the lookout.

Source for data: Wikipedia

Notes

Related Articles

00 General Chemistry Review
01 Bonding, Structure, and Resonance
02 Acid Base Reactions
03 Alkanes and Nomenclature
04 Conformations and Cycloalkanes
05 A Primer On Organic Reactions
06 Free Radical Reactions
07 Stereochemistry and Chirality
08 Substitution Reactions
09 Elimination Reactions
10 Rearrangements
11 SN1/SN2/E1/E2 Decision
12 Alkene Reactions
13 Alkyne Reactions
14 Alcohols, Epoxides and Ethers
15 Organometallics
16 Spectroscopy
17 Dienes and MO Theory
18 Aromaticity
19 Reactions of Aromatic Molecules
20 Aldehydes and Ketones
21 Carboxylic Acid Derivatives
22 Enols and Enolates
23 Amines
24 Carbohydrates
25 Fun and Miscellaneous
26 Organic Chemistry Tips and Tricks
27 Case Studies of Successful O-Chem Students

Comments

Comment section

135 thoughts on “Polar Protic? Polar Aprotic? Nonpolar? All About Solvents”

  1. Hey James,great post as expected from you.Just wanted to know,1)Is there any trend between the Dielectric constant and Dipole moment of an solvent,or does it just depends upon the structure of the molecules.2)Which is a better determining factor for polarity, dielectric constant or dipole moment?.Thanks for the help.

    Reply
  2. Pingback: Leitfaden für lösungsmittelbasierte Cannabisextraktionen und -konzentrate- Alchimia Grow Shop
  3. Pingback: Polar Protic vs. Polar Aprotic Solvents - UO Chemists
  4. Pingback: Difference Between Protic and Aprotic Solvents – In4arts.com

    1. Do you mean separate as in physically separate them in the lab, or do you mean separate as in “distinguish” ?

      Most important difference for distinguishing polar solvents: look for O-H bonds, because they will have hydrogen bonding (O is much more electronegative than H and there will be a large partial negative charge on oxygen and a large partial positive charge on hydrogen). Second most important difference: look for bonds where there is a large electronegativity difference, such as the C=O in acetone and DMF, S=O in DMSO, CN in acetonitrile.

      Very nonpolar solvents (hydrocarbons) only have C-H bonds.

      The key measurement to look for is something called “dielectric constant” which is large for polar molecules and small for non polar molecules.

      Reply
  7. Pingback: ทำไมน้ำกับน้ำมันจึงเข้ากันไม่ได้ | Pakamasblog
  8. Pingback: What are Solvent Extracts? – Marjuana Doctor Store
  9. Pingback: What Is a Solvent in Science? | The Chemistry Blog
  10. Pingback: Chemistry GCSE Revision: Bonding, Structure, And The Properties Of Matter - K-I Chemical Europe S.A
  11. Pingback: Elementor #455 -
  12. Pingback: What Is a Solvent in Science? | Buy online from UK chemical suppliers
  13. Pingback: What Is a Solvent in Science?
  14. Pingback: Chemistry GCSE Revision: Bonding, Structure, And The Properties Of Matter | Buy online from UK chemical suppliers
  15. Pingback: Chemistry GCSE Revision: Bonding, Structure & The Properties Of Matter
  16. Pingback: What are CBD Crystals? | CBD Crystal
  18. Pingback: Climate Justice 101 (w/ Katharine Hayhoe), Why Peanut Butter Gets Gum Out of Hair, and How Gaslighting Makes You Question Your Sanity – Curiosity Daily
  19. Pingback: HPLC Troubleshooting - Everything technology.

  20. Well, I guess I have something to contribute regarding the dipole moments of DCM and Chloroform. The thing is that the structure of both of these is tetrahedral with bond angle =cos-1(-0.33)=109.5 deg. Now, if you’ve got some idea about vectors, then you’ll realize that four vectors kept at this angle give net=0. But the very interesting thing is that the resultant of THREE such vectors is equal to ONE such vector, just in the opposite direction. So, in case of of chloroform, the THREE -Cl actually contribute to the dipole moment as if it were just ONE -Cl. However, in case of DCM, the TWO -Cl contribute as if there were 2cos(54.9deg.) -Cl = 1.15 -Cl

    In summary, using a bit of vector algebra:
    IN CHCl3 = Dipole eqv. to 1 -Cl
    IN CH2Cl2 = Dipole eqv. to 1.15-Cl

    Reply
  21. Pingback: What Is The Role Of A Solvent In A Chemical Reaction?

  23. I have a doubt:
    when a polar protic solvent is used as a solvent for its conjugate base, will the conjugate base be the strongest base/nucleophile in that solvent?
    Thanks!

    Reply

  24. I’m looking at the solubility of various solutes in hexane. Hexane is non-polar so it should dissolve non-polar solutes but I believe Ethyl Acetate is polar and yet it is miscible in hexane. Can you please help me understand why that is?

    Reply
  27. Pingback: Difference Between Protic and Aprotic Solvents | Protic vs Aprotic Solvents

  28. Hello, please I have a question:

    Regarding the solvation of ions ; why water dissolves K+ ions for example more than methanol does ?

    Given that: stability constant of K+ complex in water solvent is 100 , while in methanol solvent it becomes 1000,000

    So there is more solvation effect from water that led to decrease in complex formation

    ( supramolecular chemistry course )

    Reply

  29. So it is correct to say that polar protic solvents stabilise the carbocation formed in a SN1 reaction and polar aprotic solvents do not solvate the nucleophile in SN2 reactions thereby maintaining its effectiveness? Do polar protic solvents solvate the nucleophile in SN1 and if so, why is this important?

    Reply

  31. Professor,
    Would you know where to find information on the electrical breakdown voltages of organic polar solvents?
    This is the only scientific info I have not been able to find in over 50 years of independent study, assuming I knew what I was looking for..
    Thank you!
    Best regards,
    Jim Andrakin

    Reply

  32. Hi there,
    I guess you finaly explained to me a trend I was observing without any idea why. I have often encountered cases where people would use an acid-alcohol (such as HCl-EtOH) solution as solvent.
    So if I get your sentence right : “There are many examples (too many to list) where a polar protic solvent such as water, methanol, or ethanol can serve as the nucleophile in a reaction, often when a strong electrophile (such as an acid) is present.”
    then using an acid-alcohol mixture as solvent allows to be in a nucleophile environment to stabilize certain lower valences of the dissolved ions. So that would be the benefit of working in HCl-EtOH instead of HCl ?

    Reply

    1. What often happens is that the acid will protonate an alcohol and convert it into a good leaving group (R-OH2 +). After loss of water the solvent can then serve as the nucleophile.

      Reply

  33. Would DMSO as a polar aprotric solvent still be able to hydrogen exchange?

    Say I want to measure IR or VCD of glucose in deuterated DMSO, would I be able to do that without having to worry about hydrogen exchange? Otherwise I would have to deuterated all OH bonds form the glucose first.

    Reply

  34. How to decide whether the solvent used in the reaction would be a participatory one or a non-participatory one ??

    Reply

  35. Nice discussion. Does Butanol is polar (I mean, does it miscible with water).
    How do you put the order of the ff solvent with increasing polarity (diethyl ether, Butanol, chloroform and ethyl acetate)

    Reply

    1. If you search “water solubility” with all of the solvents you mentioned, you’ll find that butanol is the most soluble in water than all of them. It is by far the most polar.

      Reply

    1. If you have an extremely reactive electrophile like a carbocation, and a solvent that can react with carbocations such as water or alcohols, the solvent will be present in vast excess relative to any other nucleophile. So based on concentration alone, one would expect the solvent to react as a nucleophile.

      Reply

  40. I have a question. Why is polar protic isopropanol miscible with both cyclohexane and acetonitrile, but cyclohexane and acetonitrile are not miscible? More generally, I understand why “like dissolves like” for the polar protic and polar aprotic interaction, but why is there an interaction between a nonpolar cyclohexane and a polar protic isopropanol, yet no reaction (nonmiscible) between nonpolar cyclohexane and polar aprotic acetonitrile?

    Thanks!

    Reply

    1. So, recall acetonitrile has a N atom and so H-N intermolecular interactions are possible and hence so is hydrogen-bonding. Rules are helpful to get through a specific reasoning but they are developed not to explain how something works but rather to simplify how we think about them in problem-solving. The underlying reason why polar aprotic solvents can surround and encapsulate ions in Sn2 reactions is because hydrogen bonds can interact very well with ions in solution. So as long as 1 molecule of HCN can align so that the O atom in isopropanol is near the H atom in HCN and vice-versa between N atom of HCN and H atom of isopropanol then hydrogen bonding is the main driving force in solvation and thus miscibility.

      Hope this helps.

      Reply

  41. Thank you for making nonpolar solvents a lot more clear. It makes a lot more sense now after looking at all the compounds you listed. So a nonpolar solvent typically does not have any hydrogen bonds? After looking at chloroform, the solvent is nonpolar because the charge must be evenly dispersed among the three chlorines, right?

    Reply

    1. Hey Luke –

      “Polarity” is a bit of a continuum. One way of measuring polarity is through a number referred to as the “dielectric constant”. Water has a very high dielectric constant, whereas a nonpolar solvent like hexanes has a very low dielectric constant.

      For me, a useful “hard line” for polarity is whether or not the solvent is miscible with water – e.g. methanol, ethanol, DMSO, DMF, THF, are all mixable with water, and are quite “polar” .

      Solvents like diethyl ether, hexanes, dichloromethane, chloroform, are not water soluble and are generally classified as “non polar”. And yes, you’re correct in stating that non of these solvents have any hydrogen bonds.

      That’s not to say that there aren’t some polar aspects to some of these solvents – for example chloroform has a dipole moment, as does diethyl ether, so they are more polar than, say, pentane.

      I hope this helps a little bit! James

      Reply

  42. Hello,
    I’m currently having a little bit of trouble with a reaction and I was hoping you could help me. Is there any way that an hydrolysis reaction can be performed in a solvent other than a proctic one? I’ve been trying with Propylene Glycol or Glycerol but they don’t seem to work as well as water.
    Thanks in advanced!

    Reply

  43. Hi, James !

    First of all, congrats on your website! It’s amazing and very helpfull.
    I need some help with the application of this concept you explained. Iam not a chemist , but I need this knowledge in organic chemistry for liquid chromatography (UFLC-MS/MS) to quanitfy procyanidins (polar compounds) using a C18 silica columm. Older publications mention methanol + acidified whater as a mobile phase and the newest ones use acetonitrile + acidified water. Specialized material suggests a replacement of acetonitrile by methanol due to cost reduction and, in my case, I only had as MS grade the metanol (ACN as HPLC grade). Both are polar but ACN is a polar aprotic and metanol a polar protic. Although their dielectric constant are very similar (maybe that is why some researchers suggest the replacement), should I expect a huge difference in quantification due to the possible bondings using methanol ?

    Reply

  46. Dr James and others,
    Can you explain how cosolvents work ? For eg xylene-methanol or xylene-DMSO in certain ratios ? Do you have any references on how mixed solvents work and how to determine their ratio ?

    Reply

  47. Is Azobisisobutyronitrile highly soluble with dimethylformamide? If you combine these and then add polystyrene, will the compound dissolve into the polystyrene?

    Reply

    1. AIBN is soluble in DMF, yes. It’s a free radical initiator. I think the reaction you’re describing is free radical polymerization of styrene to form polystyrene.

      Reply

    1. THF and water are miscible. It’s a useful solvent system when you want to use water-soluble reagents, like LiOH, in the presence of organic molecules. For example hydroylsis of esters is often done in 1:1 THF/H2O

      Reply

  51. I would like to know the polarity of ethylene glycol ? is it polar or non-polar solvent ? What is the dielectric constant for ethylene glycol ?
    Does anyone know these ?

    Please help me on this.. Thanks

    Reply

  53. Which would serve better in an SN2 mechanism? H2O or OH-? There are both polar protic and not the best for this type of mechanism? so would they be equal in the rate of the reaction.

    Reply

    1. Better as a nucleophile? HO- since it’s a stronger nucleophile. The choice of solvent would best be something like acetonitrile or DMF or some other polar aprotic solvent if you are trying to promote SN2.

      Reply

  54. when methyl iodide is treated with sodium metal, ethane is formed .The reaction takes place when ether is used as a solvent !!!!!!! why is that so????

    Reply

    1. Well, this could be happening several different ways, but one pathway is reductive formation of the methyl anion followed by substitution. Another is formation of methyl radical and subsequent coupling of two radicals (termination). Wurtz coupling . Not a very high yielding reaction

      Reply

  56. A refined product was once described to me to be a “solvent-solvent”.
    Dr. James, could you enlighten me as to what that might mean in terms of its ability to dissolve various types of chemical blockages?
    Thanks,
    Roy

    Reply

  57. James, can you explain why the addition of HBr to alkenes WITHOUT the use of alkenes is favored by polar, protic solvents? Why protic?

    Reply

      1. Hi Roger – the rate limiting step will be formation of the free carbocation. The rate will be increased if we use a solvent with a high dielectric constant (i.e. polar). Solvents with high dielectric constants also tend to be polar protic (e.g. methanol). However, polar protic solvents are not a requirement for HBr addition.

        I would be wary of using a polar protic solvent because it can act as a nucleophile, trapping the carbocation.

        Here is an example where dichloromethane is used as solvent:
        http://www.orgsyn.org/Result.aspx?ga=na

        My version of March’s advanced organic chemistry doesn’t mention typical solvents for HX addition.

        Reply

    1. It is more polar than hydrocarbons, but is still not miscible at all with water. Therefore I’d classify it as a non-polar solvent.

      Reply

  63. Using a polar protic solvent increases the rate of the reaction right? Well, how am I suppose to know whether to use a type 1 or type 2?

    Reply

    1. i think it’s because the carbocation from sn1 is stabilized by dipole interactions with the solvent. in a nonpolar aprotic solvent, sn2 reactions occur better because the nucleophile isn’t hindered by dipole interactions with the solvent and can attack carbon more easily.

      Reply

    1. You seem pretty confident. Does chloroform mix well with water? : – )

      Remember that polar/nonpolar is a continuum.

      Reply

  66. Hi,

    As far as I know, Hexafluoroisopropanol (HFIP) is a good solvent for polymers, even though it is a polar protic solvent.

    But intuitively I don’t get how it works.

    Please explain this for me. Thank you.

    Reply

    1. The best property of HFIP as I know is it can dissolve either polar in non-polar molecule or non-polar in polar molecule. I used it for making the polymer blending between polyester and protein. But I don’t know how it works since I am a biologist, not chemist. If someone know about that, please give me some explanations.
      Cheers

      Reply

  67. hi
    please tell me why did wrote methyl shift bt not methanide. however CH3 is bearing a negative charg some others examples like phenyl .

    Reply

  68. Hi

    How is the electrical conductivity change with polarity? If the voltage is high, can polar aprotic solvent also electrolysis?

    Reply

  69. I have a question about Acetic Acid’s low Dielectric Constant. Compared to all the other Polar protic solvents it’s dielectric charge is very low yet when doing the same comparison its dipole moment is exceedingly high. Why is this?

    Reply

    1. Great question Elon. If you look at the trend in the table above notice that there are two O’s in acetic acid and the rest have just one or a single N atom. The dipole moment is low because the displaced charges between the HO and CO bond in acetic acid can dampen or stabilize the partial charge generated. A dipole vector points away from H and toward O while another points away from C and toward O. The negative end of the HO vector is closest to the positive end of the CO vector hence the dampening of the induced charge.

      As for the high dipole moment, remember (I had to look this up, haha) u = E*q*r,
      where
      u = dipole moment vector
      E = a summation
      q = magnitude of the charges
      r = vector of the net charge

      This would lead to the conclusion that the sum of the charges, q in acetic acid containing two highly electronegative atoms is smaller than q in the alcohols containing only one highly electroneative atom. Hence, the larger dipole moment in acetic acid but smaller in H2O which is where the dipole vectors are aligned in a way that adds the magnitude of the vectors and results in the higher 1.80D.

      Hope this helps.

      Reply

  70. all I know is that it all depends on the polarity of the content you want with the solvent. If you want to run a polar content, run it with a polar solvent as the polarities are the ones that determine the interactions.. so polar to polar and non-polar to non-polar.

    Reply

  72. The examples for the uses of each of the solvents were exactly what I needed help with and were indeed quite helpful. Those would be areas on interest to expand on. Thank you!

    Reply

    1. I believe what your referencing is a “bromine test” for allegedly saturated hydrocarbons. If bromine is added to chloroform, I believe the bromine should stay the diatomic elemental color because chloroform is saturated and therefore will not react, it should react the same with DCM.

      Reply

  74. James, your work on this topic(solvents) very amazing. Many student confused about which solvent protic/aprotic as well as polar/non-polar. awesome work. thank you. Hats of you.

    Reply

  75. Some observations:
    – paragraph 5: “Use a polar solvent to dissolve a charged species (such as, say NaOH), but don’t use it to dissolve” (the sentence ends here) – dissolve what?
    – paragraph under Polar aprotic solvents, last sentence: “For our purposes these solvents do not participate in the reaction” – dot missing at the end of the sentence
    – the reaction above Polar protic solvents – shouldn’t the stereochemistry of the C atom in the product be reversed?

    Otherwise, great work as usual.

    Reply

    1. Thanks, I’m happy that you spotted the stereochemistry example. Important to make sure inversion is there!

      Reply

      1. if you understand why HI is more acidic than HF despite the strong electronegativity of flourine then you will not have issue with dichloromethane, being more polar than chloroform, despite the higher number of the electron withdrawing group attached to the carbon, the bond- strenght is a key, and the faster the bondbreaking the beter the polarity of the solvent to pertake in reaction. note this is limited to polarity.

        Reply

        1. Exactly, never thought to compare acid strength to polarity of solvents. Acid/base strength is more useful in comparison to nucleophilicity trends.

          Reply

  76. Something that eludes me: why is the dipole of chloroform smaller than that of DCM? Shouldn’t three Cl’s be more withdrawing than two? I feel like I’m missing something, but I can’t quite put my finger on it…

    Reply

      1. Since dipole moment is based on magnitude and separation of charges, I imagine the reason is that the 3 C-Cl bonds cancel each other out more than the 2 C-Cl bonds. If I’m not mistaken, I think chloromethane (CH3Cl) has a even higher dipole moment than either DCM or chloroform.

        Reply

        1. You are correct – I’m finding it as 1.9 D. http://en.wikipedia.org/wiki/Chloromethane_(data_page)

          I’m not the world’s best at algebra but I would have thought that the vector sum of the three C-Cl dipoles would lead to a greater overall dipole than just a single C-Cl bond. Perhaps the C-H bonds provide additional electron density that allows for greater overall polarization of the molecule.

          Reply

          3. I would have thought that it is because Carbons 2p2 electrons are being shared between more Chlorines in the Chloroform you have a weaker dipole moment between each of the C-Cl bonds than in DCM. So you have a greater dipole moment in DCM. Dipole moment of chloromethane is 1.09, DCM is 1.60 and Chloroform 1.04. With chloromethane I imagine that one Chlorine is not sufficiently strong enough on it’s own to form a large dipole moment.

            Further Chem: Drawing out the molecular orbital diagrams may help as it would show which electrons enter which sub shell and that would show you if it is entering a higher or lower energy level.

        2. If you make respective carbocations of these three species by removing 1 chlorine atom and compare their stability, clearly ch3+ is most stable, that means chloromethane would most likely to be polarised.

          Reply

          1. Actually, CH3+ would be least stable. Don’t forget that Cl can donate a pair of electrons to form a pi bond.

          2. @James, But as Cl is 3rd periodic element where C is 2nd periodic, I don’t think their p-orbital will overlap very well due to size difference, in that case we have to prefer inductive effect over resonance.
            For F though your point may be valid, it can be verified if the order of polarity of Fluoro-methanes are reverse of Cl substituted methanes.

        3. You’re also missing the fact that there is an additional Hydrogen atom in DCM vs chloroform. Because Hydrogen is more electropositive than Carbon the dipole moment is lower. For example, compare the electronegativity between HCl and CCl bonds. Although this difference is small it’s effect on the dipole moment is apparent.

          chloroform 1 H 1.9D
          dichloromethane 2 H’s 1.6D
          chloromethane 3 H’s ~1.1D

          Hope this helps.

          Reply

    2. I think it is because the inductive effect of the three Chlorines on chloroform cancel out much of the outward negative dipole while with DCM, there are only two chlorines to withdraw electrons, thus less cancelation of the inductive effect.

      Reply

      1. Back to vector sums, folks. If you place CH2Cl2 and CHCl3 on a cartesian diagram so that the overall dipole would point to a value of -Y (straight down, traditionally), then the C-Cl bonds have larger -Y values for CH2Cl2 than for CHCl3. Simple geometry puts the angles from the x-axis as 35º below X for CH2Cl2 and only 15º below the X-axis for CHCl3. Hard to describe, but if you build a molecule and imagine it on a cartesian coordinate system, you’ll be fine.

        Reply

    4. Its doesnt matter 3 Cl- are withdrawing electron density….but they are pulling it in different directions……dipolemoment is a vector quantity and should be subjcted to vector additions as u know in ccl4 DP=0…there are 4 cl- ions yet it is 0….coz they are in different directions….the 3 cl- ions will be as far as possible due to steric repulsions..so they pull in differrnet direction….like a big box of chocolate is pulled by kids in all direction.

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.