What makes a good leaving group?

Good Leaving Groups Are Weak Bases

• A leaving group (a.k.a. “nucleofuge”) is the new Lewis base that is generated in various substitution and elimination reactions when a new bond is formed to carbon.
• Just as acid-base reactions favor reactions where a stronger acid plus a stronger base results in a weaker acid and a weaker base, substitution and elimination reactions tend to favor reactions where the leaving group is a weaker base than the nucleophile (or base, in the case of elimination reactions)
• Using pK_a values it is possible to make good predictions as to whether various substitution or elimination reactions are favorable. Good leaving groups tend to be weak bases, i.e. the conjugate bases of strong acids (I^–, Br^–, Cl^–, TsO^–, H₂O)
• Poor leaving groups (which tend to be strong bases) can be made into better leaving groups through addition of a strong acid (or a Lewis acid). For example, alcohols can be converted into alkyl chlorides through addition of HCl. 
• Although the relative basicity of the nucleophile/leaving group is a good guide, a prominent exception is fluoride (F-) which is a weak base but tends not to act as a leaving group due to the extremely strong C-F bond (about 130 kcal/mol).
• When the basicity of the nucleophile and leaving group are comparable (i.e. within about 5-10 pK_a units), an equilibrium may be established.

Table of Contents

1. What Is A Leaving Group?
2. The Principle of Acid-Base Mediocrity, Revisited
3. Using a pKa Table To Evaluate Leaving Group Ability
4. The Conjugate Acid Is A Better Leaving Group
5. The Conjugate Base Is A Worse Leaving Group
6. Exceptions – Fluorine
7. The Best Leaving Group of All (N2)
8. Summary
9. Notes
10. Quiz Yourself!
11. (Advanced) References and Further Reading

1. A Leaving Group Is Just A Nucleophile Going In Reverse

Many reactions that involve nucleophiles and bases result in the formation of a leaving group (also called a “nucleofuge“).

So what is a leaving group, anyway?

Well, a leaving group is just a nucleophile acting in reverse.

That is, whereas a nucleophile is the Lewis base that forms a new bond with a carbon, the leaving group is the Lewis base that results after breaking a bond with the carbon.

Here is an example of a reaction that produces a leaving group.  This is a nucleophilic substitution reaction – specifically a nucleophilic substitution reaction at an alkyl carbon with with a bimolecular rate-determining step (SN2).

Note that this reaction has four components.

• A substrate (an alkyl halide in this case, which will be acting as an electrophile)
• A nucleophile (the CH₃CH₂O(-) ion)
• The product (the ether)
• The leaving group (the chloride ion, Cl(-)  )

A C-O bond is formed, and a C-Cl bond is broken.

To see a few more examples of reactions that result in leaving groups we will cover below, hover here for a pop-up image or click on this link.

There is nothing stopping us from taking the reaction drawn above and flipping it around to give a reaction that goes in the opposite reaction. So let’s draw that out:

Note how in this drawing, the Cl(-) is the nucleophile and the RO(-) is the leaving group.

Note that I’m not saying that these two reactions are equally likely.  Just because we can draw these two reactions does not mean that they are equally favored in a reaction vessel.

However, it is true that, as drawn, both of these reactions are nucleophilic substitution reactions, because we are forming and breaking a bond on the same carbon.

That being said: which reaction do you think is more favored?

In other words, if we ran the experiments, which reaction would you predict to proceed to completion?

Click to Flip

Congratulations if you said, the top one.

Why?

2. Are Substitution and Elimination Reactions Just Fancy Extensions of Acid Base Reactions?

Let’s change one little thing about that reaction above, and see if this looks a bit more familiar.

In the acid-base reaction between H-Cl and NaOCH₂CH₃ to give CH₃CH₂OH and NaCl, which direction would be more favored?

You might recall the Principle of Acid-Base Mediocrity: Stronger acid plus stronger base gives weaker acid and weaker base. (See post: How To Use a pK_a Table).

So the favored direction of this acid-base reaction is formation of the weaker base (Cl -)

Just as acid-base reactions tend to be favored when we go from a stronger base to a weaker base, substitution and elimination reactions also tend to be favored when the leaving group is a weaker base than the nucleophile (or base).

In fact, the four components of an acid base reaction map pretty well onto the four components of the nucleophilic substitution reactions, above.

• Acid  → substrate
• Base → nucleophile
• Conjugate acid → product
• Conjugate base → leaving group

The substitution above also favors formation of the weaker base (Cl-) from the stronger base (CH₃CH₂O-)

For that matter, so does this elimination reaction

If the leaving group and base are flipped, the reaction is much less favored. To see this “flipped” reaction, hover here for a pop-up image or click on this link.
This is also the case with the loss of leaving group in this SN1 reaction:

There are many more examples, like these nucleophilic acyl substitution reactions that you will see in Org 2. To see an example,  hover here for a pop-up image or click on this link.
Generally speaking, the weaker the base, the better the leaving group.

We can reverse this and also say that the stronger the base, the worse the leaving group.

3. Using a pK_a Table To Determine Leaving Group Ability

If base strength determines leaving group ability, then a pK_a table should be a pretty good guide to determining leaving group ability.

In a previous post (See: How To Use a pK_a Table) we went through this in considerable detail.

Recall that the stronger the acid, the weaker the conjugate base.That means that the top portion of a pK_a table should be an excellent guide to the best leaving groups. The conjugate bases of strong acids, such as I(-), Br(-), Cl(-), HOSO₃(-), TsO(-), H₂O, and others are weak bases and great leaving groups.

Here is another example of a favorable reaction, where the nucleophile is more basic than the leaving group:

Note that pK_aH is shorthand for “the pK_a of the conjugate acid”. 

On the other hand, the bottom part of a pK_a table should be a guide to the worst leaving groups – the conjugate bases of weak acids, such as H(-) and H₃C(-) are extremely strong bases.

This is why we never see alkyl groups or hydride ions as leaving groups.

I should stress that comparing the basicity of the nucleophile and leaving group is a good place to start, but is not the only variable. The relative strength of the bonds being broken and formed is also a factor, which comes up most prominently with fluorine (see Exceptions, below). 

When the nucleophile and leaving group are of comparable basicity (i.e. within about 5-10 pK_a units), substitution reactions are potentially reversible, and the equilibrium can be driven to one side or the other depending on what conditions we choose. [Note 1]

Also, it’s important to remember that acidity and basicity (i.e. pK_a) are measured by the position of an equilibrium (think “differences in energy”) whereas nucleophilicity is measured by reaction rates since many reactions of nucleophiles are irreversible. So although the correlation is very good, it isn’t perfect.

Also, be on the lookout for acid-base reactions. A good rule of thumb is that acid-base reactions are fast, relative to substitution and elimination reactions (see post: Acid-Base Reactions are Fast)

4. The Conjugate Acid Is A Better Leaving Group

Hydroxide ions are poor leaving groups because they are strong bases.

We might ask ourselves: is there some way to modify the OH so that when the C-O bond breaks, the leaving group is a weaker base? Then it would be more favorable.

Yes, there is a simple and effective way to make OH a better leaving group.

If we just add strong acid, then we make the conjugate acid of R-OH, which is R-OH₂(+).

Now, if Cl(-) attacks, our leaving group will be the weak base H₂O. This is a factor of 10¹⁴ less basic than HO(-).

So in the presence of acid, this reaction becomes much more favorable. The conjugate acid is a better leaving group! (This is one of the major applications of acid catalysis in organic chemistry.)

In the chapter on alcohols, we’ll see that many substitution and elimination reactions of alcohols require acid in order for the OH group to leave.

Lewis acids can be used for this purpose as well. [Note 2] We will see many examples of this in the chapter on electrophilic aromatic substitution (e.g. in the Friedel-Crafts reaction where Lewis acids like AlCl₃ are used to make Cl into better leaving groups (See post: The Friedel Crafts Alkylation and Acylation Reactions).

Other ways to modify -OH to make it into a better leaving group includes transforming them into sulfonates, which are much weaker bases than HO(-).   [See post: Tosylates and Mesylates] [Note 3]

5. The Conjugate Base Is A Worse Leaving Group

It’s true that the conjugate acid is a better leaving group. It’s also worth noting that the conjugate base is a worse leaving group.

Also, acid-base reactions are faster, generally speaking, than substitution and elimination reactions.

If a strong base is added to a species with an acidic proton, the acid-base reaction will occur first. This will give the conjugate base, which will possess a much worse leaving group than the neutral species.

Here’s an example. You might think the leaving group here is HO(-) . It’s not. The leaving group would have to be O(2-)

Click to Flip

That’s a much worse leaving group.

Along the same lines, don’t forget that carboxylic acids…. are acids!

6. Exceptions

Is that all there is to it? Just apply the Principle of Acid-Base Mediocrity and we’re done with it?

Not quite. It wouldn’t be organic chemistry if we didn’t mention some exceptions.

One prominent exception is fluorine. Fluoride ion (F-) is a weak base (the pK_a of HF is 3.8) , but generally a poor leaving group in substitution reactions. [Note 4]

One key reason is the strength of the C-F bond (about 130 kcal/mol).

Up to this point, we’ve only really considered the stability of the leaving group relative to the nucleophile. But the stability of the product is important as well.

Since the C-F bond is so strong, the reverse reaction (breaking the C-F bond, giving F(-) as a leaving group) would have an extremely high activation energy, making it very unfavorable.

So the key variable is not just the relative stability of the nucleophile versus the base, but also the strength of the bond that is forming and breaking.

Another example of a reaction where fluorine is a leaving group is nucleophilic aromatic substitution, but the breaking of C-F is not the rate-determining step in this case (See Post: Nucleophilic Aromatic Substitution)

7. The Best Leaving Group Of All

Probably the best leaving group of all is dinitrogen (N₂). Not only is nitrogen exceptionally stable – after all, it’s 79% of our atmosphere and is essentially inert – it is a gas, which means that any organic reaction where N₂ is displaced will result in it bubbling out of solution, rendering the reaction essentially irreversible (sometimes explosively so!). 

Amines (R-NH₂) can be converted into diazonium salts R-N≡N(+) with nitrous acid (HONO) through a process called “diazotization”.

However dinitrogen is such a good leaving group that sp³-hybridized carbon atoms bonded to N₂ are exceptionally unstable and tend not to stick around long enough to participate in reactions with nucleophiles; once formed, the N₂ just leaves, resulting in carbocations (and not uncommonly, shattered glassware) in its wake.

Diazonium salts of sp²-hybridized carbons are considerably more stable and used in organic reactions; for more information, see this post (See post: Reactions of Diazonium Salts)

8. Summary

Let’s review.

• Leaving groups are nucleophiles acting in reverse – i.e. they are Lewis bases formed from the breakage of a bond to carbon.
• Just as acid-base reactions are favored in the direction which results in a weaker base being formed from a stronger base, reactions involving leaving groups also tend to be favored in the direction which gives the weaker bas.
• The conjugate bases of strong acids (e.g. I-, Br-, Cl-, TsO-, H2O) are good leaving groups.
• The conjugate base of weak acids (H-, H3C(-), alkyl anions) are poor leaving groups.
• The conjugate acid is a better leaving group. One common example is with alcohols, which can undergo substitution and elimination reactions after the HO is protonated.
• The conjugate base is a worse leaving group. A good rule of thumb is to do acid-base reactions first.
• Fluoride ion (F-) is a weak base, but a poor leaving group due to the strength of the C-F bond.

If you’re not sure where a reaction is going to happen on a molecule, look for a good leaving group. That’s usually where the action is!

Notes

Note 1. When the basicity of the nucleophile and the leaving group are comparable (i.e. within about 5-10 pK_a units) then the reaction has the potential to be reversible. (For more information on this 5-10 pK_a unit number, see A Handy Rule of Thumb For Acid-Base Reactions)

In this case it is an equilibrium and the position of the equilibrium can be influenced by Le Chatelier’s principle. For example it is possible to make a reaction proceed from a weaker base to a stronger base by using a large excess of the nucleophile, or by removing the stronger base.

One interesting example is based on different solubilities. The Finkelstein reaction is a way of making alkyl iodides from alkyl chlorides. There is not a tremendous difference between the leaving group ability of chloride ion or iodide ion. However, there is a significant difference between the solubility of NaCl (or NaBr) and NaI in acetone. NaI is soluble in acetone; NaCl is not. Therefore as NaCl is formed, it precipitates out of solution, driving the reaction to the right. Another example of Le Chatelier’s principle in action!

Note 2 – Lewis acids may also be used. With alkyl halides, sometimes silver salts such as AgNO₃ or AgBF₄ are used to assist with the loss of a Cl or Br group (the counter-ion NO₃(-) or BF₄(-)is just a spectator here).  The Ag(+) coordinates with the Cl or Br, resulting in a much better leaving group (the silver halide salt).

Other examples of Lewis acids serving to increase leaving-group ability are found in several reactions of aromatic compounds, such as the Friedel-Crafts acylation reaction, where a Lewis acid (e.g. AlCl₃)  assists in loss of Cl from an acid halide:

Note 3– Alcohols can be converted into alkyl sulfonates through the use of reagents such as p-toluenesulfonyl chloride (TsCl) or methanesulfonyl chloride (MsCl). Sulfonates are excellent leaving groups since the negative charge on oxygen can be delocalized through resonance. An even better leaving group than (-)OMs or (-)OTs  is the trifluoromethylsulfonyl group (-)OSO₂CF₃  “triflate” group, where the hydrogen atoms on OMs have been replaced with electron-withdrawing fluorines.

Note 4 – Fluorine is a poor leaving group in nucleophilic substitution reactions, but can, in certain cases, be a leaving group in various elimination reactions. One example is the E1cb mechanism, where the first step is formation of a conjugate base, followed by (rate-determining) elimination of a leaving group.

Another example of fluorine as a leaving group is in the nucleophilic aromatic substitution reaction, where the electron-withdrawing  F actually helps to make the carbon more electrophilic. Sanger’s reagent, which was used to determine the sequence of peptides in insulin, is a useful example of a reagent for promoting nucleophilic aromatic substitution that has fluoride leaving groups.

Note 5 – It’s possible for a species to be both a good nucleophile and a good leaving group. Nucleophilicity is defined through the rate of reaction of a nucleophile with a given substrate. The carbon-iodine bond is fairly weak, however (about 50 kcal/mol), and readily undergoes cleavage.

Note 6 – A more full pK_a table.

Note 7. My personal vote for “best leaving group of all time” is found in this reaction.

The researchers wanted to study the properties of the alkynyl cation, which is exceptionally unstable and short-lived. However, by putting a radioactive tritium atom on the terminal carbon, a small amount of beta-decay resulted in a helium atom, which promptly left, resulting in an alkynyl cation (which reacted with the solvent, benzene). Of course they didn’t wait around for 12 years to get to 50% completion :-) [Ref – J. Am. Chem. Soc. 1988, 110, 1298 ]

Quiz Yourself!

Click to Flip

(Advanced) References and Further Reading

1. Generation and trapping of an alkynyl cation
   Giancarlo. Angelini, Michael. Hanack, Jan. Vermehren, and Maurizio. Speranza
   Journal of the American Chemical Society 1988 110 (4), 1298-1299
   DOI: 10.1021/ja00212a052
2. The Effect of the Carbonyl and Related Groups on the Reactivity of Halides in SN2 Reactions
   F. G. Bordwell and W. T. Brannen
   Journal of the American Chemical Society 1964 86 (21), 4645-4650
   DOI: 10.1021/ja01075a025