dasdas

Master Organic Chemistry Reaction Guide

Oxidation of aromatic alkanes with KMnO4 to give carboxylic acids

Description: Treatment of an alkylbenzene with potassium permanganate results in oxidation to give the benzoic acid.

1-conversion of alkylbenzenese to benzoic acids using kmno4.gif

Notes: The position directly adjacent to an aromatic group is called the “benzylic” position.

The reaction only works if there is a hydrogen attached to the carbon.

Examples:

examples of kmno4 oxidation of benzylic carbons

Notes: Note that in example 2 the extra carbons are cleaved to give the same product as in example 1. And in example 3, two benzoic acids are formed. Finally, when no hydrogens are present on the benzylic carbon, no reaction occurs (example 4).

Mechanism: For the purposes of Org 1/ Org 2 the mechanism isn’t considered that important. Manganese acts in mysterious ways. It’s thought that the first step is removal of a hydrogen by one of the oxygens on MnO4(–) in a free-radical reaction. Beyond that, it gets complicated.

benzylic-oxidation-with-kmno4-proposed-mechanistic-process-using-homolytic-dissocation-of-c-h-bond-followed-by-internal-return

Quiz Yourself!

Click to Flip

Click to Flip

Click to Flip


(Advanced) References and Further Reading

For some examples “in the wild”, see the following.


Real-Life Examples:

Org. Synth. 1927, 7, 18

DOI Link: 10.15227/orgsyn.007.0018

Click to Flip

Org. Synth. 1922, 2, 53

DOI Link: 10.15227/orgsyn.002.0053

Click to Flip

Org. Synth. 1930, 10, 20

DOI Link: 10.15227/orgsyn.010.0020

Click to Flip

Org. Synth. 1940, 20, 79

DOI Link: 10.15227/orgsyn.020.0079

Click to Flip

Comments

Comment section

195 thoughts on “Oxidation of aromatic alkanes with KMnO4 to give carboxylic acids

  1. Hi, is it possible that during the KMnO4 oxidation of styrene one of the products besides the benzoic acid and styrene glicol could be phenylacetic acid?

    1. Not in any useful quantity.

      If you want phenylacetic acid from styrene, one way to do it would be to perform hydroboration-oxidation to get phenylethanol. Then oxidize the primary alcohol up to the carboxylic acid using an oxidant like chromic acid or similar.

  2. What will happen if I treat benzyl alcohol with Kmno4? Will I get phenylethanoic acid if not how to obtain phenylethanoic acid from benzyl alcohol

  3. How would Styrene behave under such conditions? I came across a question in my test in which styrene reacted with KMnO4, I marked the option with vicinal diol, turns out I was wrong.

    1. Depends on conditions. Cold, dilute KMnO4 with styrene would give a vicinal diol. But as soon as the reaction mixture is heated, it would undergo oxidative cleavage to form benzaldehyde, which would then oxidize further to benzoic acid.

    1. Can be oxidized all the way to trimesic acid.

      From the following reference (open access) – https://cdnsciencepub.com/doi/pdf/10.1139/v89-211
      . A series of alkyl-aromatic compounds has recently
      been oxidized by potassium permanganate in the presence of a
      phase-transfer catalyst (8-12). In this way toluene, stilbene,
      p-xylene, mesitylene, and durene were oxidized with potassium
      permanganate in a two-phase system (hydrocarbon/water) containing cetyltrimethylammonium bromide (CTAB) in 1 : 1 :3.3 X
      1OP3:138 molar ratio (ArH:KMn04:CTAB:H,0) at 70-8VC,
      yielding the corresponding benzenecarboxylic acids, i.e., benzoic (93%), terephthalic (95%), trimesic (90%), pyromellitic
      (80%), and benzoic (84%) acids, respectively (8).

  4. Hi James.
    Can KMnO4 be used to to produce benzoic acid from cumene in an acidic environment? I’m using acetic acid as a solvent. Also, what te.perature and time should be required?

  5. Its said that for converting toluene to benzoic acid the most suitable reagent is alcoholic KMnO4 …. though we know full well that acidic KMnO4 or alkaline KMnO4 are good oxidising agents . Can anyone say if KMnO4 oxidise alcohol to ethanoic acid then is it not possible that the yield of benzoic acid obtained will be less than if acidic KMnO4 was used> ..since some of the KMnO4 is already used to oxidise the ethanol ? or is it because EtOH promotes radical reactions …. which appears not too justifying.

  6. What happens when 3 phenyl propanal is oxidised with kmno4? Does it convert to 3 phenyl propanoic acid or benzoic acid? (I think it would the first one).

  7. I had a question. If the presence of a handheld hydrogen is necessary, then why does acetophenone get oxidized to Benzoic acid upon subsequent oxidation?

  8. Hi, I have a question about the second example, why the methyl group in m-tert-butyl toluene doesn’t oxidize with Kmno4?

  9. Thank you, Sir.
    Moreover, it is then just phenol and aryl amines that decolourise Baeyer’s reagent.
    I actually don’t understand why benzene and aryl chlorides do not decolourise it but phenol does.
    Maybe phenol reacts in a different way unlike the alkenes.
    I would be grateful if you enlightened me a bit.

  10. I have an off track doubt. What happens if we add Baeyer’s reagent to an aryl halide like chlorobenzene?
    Is there any reaction?

  11. would it still oxidize to benzoic acid if the benzylic position is quartairy but one of the substitutes of the benzylic position is an amine?

  12. What happens if diphenyl methane is used as reactant? Do 2 molecules of benzoic acid form, or 1 benzoic acid and 1 benzene. Do products differ if oxidant is L.R first and then in excess?

    1. Color change is a part-per-million phenomenon that is often not diagnostic. Methylbenzene (toluene) is colorless, and benzoic acid is also colorless. But trace impurities can lead to color.

  13. Hi there… How about this compound.. (C6H5)-CH2C(CH3)2OH?.. Could it be oxidised to benzoic acid as well? Even though it is a tertiary alcohols?

    1. The double bond will be dihydroxylated by KMnO4. At low temperatures with base this can be isolated as a diol. With heating or acid oxidative cleavage will occur to give an aldehyde which can be further oxidized to give a carboxylic acid.

  14. if (C6H5)CH2CH2OH reacted with H+/KMnO4 —>>
    what product formed???
    benzoic acid or 2-phenylethoic acid ???

  15. I have two methyl groups at pyrazole ring at 1,3 position. I want to convert both groups to CA. I tried so many times with KMNO4 +water or KMNO4+ pyridine or KMNO4+NaOH. but I could not get acid groups. Please hewlp me or suggest me some other route.

    1. It’s probably hitting the pyrazole nitrogens, forming an N-oxide. I would suggest doing benzylic bromination or similar reaction first, followed by conversion to alcohol and then mild oxidation to the carboxylic acd.

  16. If the compound we treat with KMnO4 is a group like -CH2COCH3 Would that oxidize by the reagent ? Since this substitute has alpha carbon but also this is a ketone group

    1. If the compound we treat with KMnO4 is a group like R’-CH2COCH3 (R’=benzene) Would that oxidize by the reagent ? Since this substitute has alpha carbon but also this is a ketone group

  17. I believe if you use alkaline KMnO4, then you will not get the observation “purple solution is decolourized”.. instead you might get “purple solution produces brown ppt”.

    Can any one have any idaa what is brown ppt??

  18. What about activated benzene ring with KMnO4 and heat?
    In my notes o cresol decomposes
    So will every activated ring be decomposed ?

  19. For the first example, is there a way to add the carboxylic acid group to the structure so that there is a carbon between the benzene ring and the carbonyl carbon? Thanks!

  20. Whats the mechanism of action of the oxidation reaction taking place how the mno4 ion attack on the alkyl benzene and form cooh grp. Can u show it structurally.

    1. Oh, absolutely. Oxidation of aldehydes to carboxylic acids is extremely easy. If you leave benzaldehyde out long enough, air will oxidize it to the carboxylic acid. Using KMnO4 is like using a thermonuclear bomb to kill a moth.

  21. Hey,

    If the benzene is attached to a cyclohexene and you add this molecule to kmno4 for 2 hours at room temperature, what is the product? Do you get a ketone at the benzyllic position with a carboxylic acid?

    Thanks

    1. In the presence of acid, acetophenone will exist as its enol form. The enol form, which contains an alkene, WILL react with KMnO4 to give the diol, and then it’s off to the races.

  22. HI James
    Do you know how the oxidizing power (or ability) of KMnO4 compares to microbial enzymes for degrading biomolecules found in plant material or soil organic matter?

  23. What about if you had (ethoxymethyl)benzene and attempted this oxidation? Would you oxidize the benzylic carbon to a carbonyl and keep the ether linkage, or would you get a carboxylic acid as is outlined above?
    Thanks.

    1. Great question. You’d likely oxidize the two C-H bonds on the benzylic carbon to C-O, which would give you an ester, and under the typical reaction conditions (aqueous acid, heat) , you’d probably hydrolyze it. My guess is that the CH2 group on the ethoxy linkage would oxidize as well, since the reaction proceeds through a free radical mechanism and radicals on carbons directly attached to O are stabilized.

  24. Hi James if the benzene ring has a carbon which has 3 OH groups attached to it will it get oxidised to benzoic acid?
    I the beryllium carbon odes not have a hydrogen?

  25. hi. i need to know the mechanism of the reaction of ethyl benzene with KMnO4…
    actually i want to know why both methyl benzene and ethyl benzene give the same product…
    thank you in advanced

  26. thanks for the great info!
    you mentioned that a benzylic H is necessary for this reaction to occur. However i read in Solomons that even PhCOCh2Ch3 reacts and gives Ph COOH .how can this happen?
    thanks again.

    1. That’s an ester hydrolysis, not an oxidation. Sorry, saw an extra oxygen where there wasn’t one.
      Yes, hydrogens on carbons adjacent to carbonyls contain weaker C-H bonds than do normal alkanes, so this reaction is possible. They are weaker because of an effect known as “captodative stabilization”, where the free radical initially generated is stabilized by interaction with the orbitals of the carbonyl. I know this is a very technical sounding answer, but it’s not dealt with very much in introductory organic chemistry.

      1. I believe also in this particular case, the enol double bond can be broken by KMnO4 as alkenes do, forming the same product.

  27. Hi there.. just to confirm. so does that mean if the side chain is a ketone it wont get oxidised? because the adjacent carbon to the aromatic ring has no H. is that a fact?

  28. I thought KMnO4 could be used to create double bonds? For example if I used NBS to attach a Bromine to the benzylic carbon, could I then used KMnO4 to create a double bond and remove the Bromine? Do I have my reactants mixed up?

  29. Say there is a halogen attached to the benzene ring, will it remain while the alkyl chain is oxidized? Thank you for this helpful page!

  30. Do we use acidified or alkaline KMnO4? Or it doesn’t really matter?
    Great website though! Helped me so much! People like you deserve happiness :’)

    1. Hi Ashley.. I believe if you use alkaline KMnO4, then you will not get the observation “purple solution is decolourized”.. instead you might get “purple solution produces brown ppt”. Acidified KMnO4 is needed to give the “decolourized” observation.

      BTW.. a BUG *THUMBS-UP* to those of you who manage this website. It is an EXCELLENT resource for Organic Chem, right till A Level !!! :)

  31. Can you please tell me if KMnO4 will react with one of these, if not which one and the name please?
    CH3-CH-OH-CH2-CH3
    Cyclobutyl alcohol and methyl cycloprophy alcohol?

    1. Under mild conditions, each of these would be oxidized to ketones, to start with. If any enolization starts to occur (acid would help with that) then the enol would be dihydroxylated and you’d end up with oxidative cleavage products.

    1. That’s an alkene. Ocidation of alkanes gives carboxylic acid except oxidation with CrO2Cl2 wich gives an aldehyde. Oxidation of alkenes gives diols and oxidation of alkynes gives a dioc acid

  32. Hello James,

    Is it only KMnO4 has the ability to oxidise benzylic carbon to carboxylic acid, is there other oxidant capable of doing this?

    Will this oxidation reaction also possible for allylic carbon?

    1. Great question! Yes, in theory, KMnO4 is useful for such a task. However in practice, other reagents such as SeO2 (among many others) are typically used for this reaction. Google “allylic oxidation”.

  33. Since in the second example the second product is acetic acid, would the products of reaction n°3 be phtalic acid and oxalic acid?

    1. Assuming excess KMnO4, it would probably eventually convert to oxalic acid and then 2 equivalents of CO2.

  34. Are there any other ways to remove the methyl group where the mechanism is known? i.e. substitute it for a Br or F? and then add a carboxylic acid afterwards?

    Thanks

  35. If there is a halogen let’s say attached to our alkyl group will it form carboxylic acid ? and if there is an alkene not directly attached to the benzene but in the side chain will it form carboxylic acid?

    1. Yes, as long as the carbon has at least one H in addition to the halogen, it will still form a caroboxylic acid – the chlorine will eventually get hydrolyzed. As far as the side chain is concerned, it will be completely cleaved until only the carboxylic acid attached to the ring remains.

  36. What if potassium permanganate reacts with a Benzene (none substituted) will there be any product since KMnO4 usually racts with the Benzylic Hydrogen

    1. In this example both CH2 groups are cleaved to give carboxylic acids. The alkyl C-C bonds are cleaved in the process, resulting in breakage of the cyclohexane ring.

    1. It’s a long sequence beginning with hydrogen abstraction and “rebound” of oxygen to carbon. There’s some uncertainty about the exact mechanism, so it hasn’t been shown.

  37. what is the difference in the oxidation products of hexane,cyclohexane,xylene,benzene,benzylchloride,and methyl benzene by KMnO4? i cant understand the reactions

    1. For methylidene cyclopentane, it would cleave the C=C bond, to give cyclopentanone and formic acid. Actually the formic acid would probably become CO2.

    1. Yes, I believe that H2CrO4 can also be used for this purpose. Not sure about the mechanism; in both cases, it’s fairly obscure.

  38. You said the mechanism for the KMnO4 causing a carboxylic acid formation to the CH3 of the benzene is too complex for this site. Do you know where I can find the mechanism?

    1. You might start with looking through March’s Advanced Organic Chemistry for this reaction and follow the reference from there. Essentially the first step is that KMnO4 removes a hydrogen from the benzylic position, forming a benzyl radical, and the oxygen then “rebounds” back to the carbon to form C-O. This repeats several times; the overall mechanism can go through several different pathways, but this is the essentials of it.

  39. In the second example, there is a three-carbon chain on the benzene, KMnO4 cleaves the chain leaving just one C (carboxylic acid). What is the other product formed then? Does the 2 carbon-chain cleaved off get oxidized too, so you’d have H3C-COOH? Or does it just stay as ethane or what? Essentially, does KMnO4 oxidize both sides of the benzylic hydrogens so it cleaves both sides into having a -COOH group on the cleaved side, or does KMnO4 only oxidize the side with the benzene to have a carboxylic acid?
    Thanks for this great and very helpful website!

    1. Yes, the other product would cleave as a carboxylic acid to give H3C-COOH although it’s quite possible that under these reaction conditions the alpha-position of the carboxylic acid would undergo further oxidation to HOOC-COOH, (oxalic acid) which would then probably oxidize to CO2.

      In short, yes – KMnO4 should oxidize both sides.

      1. If one carbon is getting cleaved from the molecule then I guess it should form HCOOH instead of CH3COOH (as mentioned by you guys above). And further if KMnO4 is in excess amount then HCOOH should probably get oxidised to CO2.

        Correct me if I am wrong.

        1. IAmAGeek, TA asked about the second example. The second example has a three carbon chain attached to the benzene ring. Therefore, two of those three carbons would be cleaved as an ethane chain which would then be oxidized to form H3C-COOH.

        2. if you start with “propanyl-benzene”? you add the carboxylic acid group on the carbon closest to the ring.. once leaved of, youll have a piece if CH3-CH2 which will be oxidized to CH3COOH

    2. Yes James is halfway correct only thing he missed is is a tertbutyl carboxylic acid
      So we have tbutyly carboxylic acid ,oxalic acid (2 moles to be specific ) and CO2

      The reactions skeletal mechanism can be seen by action of KMnO4 on each of benzenes double bond converting the ends to carboxylic acids , the upper part with the tertbutyl group is oxidized twice

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.